Find us on Google+ Inventor Tales

Wednesday, September 05, 2018

Fusion 360 Has A Title Block Editor!

A little while ago, Fusion 360 found itself with a bright, shiny, new Title Block Editor.  It's not as exciting as some of the other tools (I'm looking at you Generative Design), but it's a tool that's very necessary for many users.

When tools like Generative Design have all the flash,
how is the Title Block Editor supposed to stand out? 

So with a little spare time on my hands, I decided to spend a few moments giving the Title Block Editor a try.

My first step was to create a new template from the file menu.

Starting the Title Block Editor

Choose the options for the title block, such as source, standard, and sheet size, and click OK.

An example of the title block options
Once the template generates itself, zoom in on the title block, select it, right click and choose "Add Title Block" to create a new title block.

Adding the new title block
This creates an editable copy of the title block.  It's time to give the title block a name, and you're ready to edit.

Givein the Title Block a Name
Editing is pretty intuitive in my opinion at least.  Sketch, insert images, and place properties as needed to Create the required title block.

The tools at the users disposal. 

For my first tests, I threw an image and a few lines.  I also changed the "CODE" section of the title block to "CAGE CODE", and added the "PROJECT NAME" attribute.

Modifying the title block
I do find myself wishing for the ability to dimension the geometry, although when all is said and done, it's a title block, so close enough is probably good enough in this case.

There's also the ability to use geometry and grid snaps, which helps create more accurate geometry.  I suppose it's the old Inventor user in me feeling the black hole like gravitational urge to fully constrain everything.

The more I practice with it, the more comfortable I found I got.  Go figure!

Now save the template like any other document, and the template will be ready to use, with the new title block.

Saving the Title Block
Now when starting a new drawing, choose "From Template", and you'll be able to start using those fancy title blocks I'm sure you'll all be creating!  Note that you may have to browse to the location where the template was saved.

Adding the Template
The drawing can be created and the new title block can be put to use.  The auto-populating properties are already populating.

The custom title block in use.
Personally, I've only scratched the surface.  I have more to test and try, and certainly more to learn.

Next, I think I'll tackle those customer properties.  Stay tuned!

Acknowledgements:

photo credit: torbakhopper liberace is still having fun times in the lower haight, scott richard via photopin (license)

Friday, August 31, 2018

A Fusion 360 Doodle - A Hydraulic Reservoir

With my time consumed by more than one project, I don't get the time to blog as often as I like.

But I wanted to share a 3D "doodle" I mad  in Fusion 360.

It's a rudimentary hydraulic reservoir, based on the type that has been used for many aircraft for quite some time.  I modeled it because I find a certain inspiration in a simple solution to  a problem. 

The challenge for this hydraulic system?  How is a supply of hydraulic fluid kept for the emergency system, should the primary system fail, and bleed out completely? 

The solution? There are two intakes in the reservoir.  The inlet for the primary system uses a standpipe, which sits higher in the reservoir than the inlet for the emergency system. 

Showing the different inlets in the hydraulic reservoir
The result is should the primary hydraulic system completely fail, it can only empty the reservoir to the level of the standpipe. 

That leaves enough fluid for the emergency system, allowing the pilot to do things like lower the landing gear and flaps for example. 

The primary system has failed.  But the Emergency system
can still get you home. 

 It's a clever way to solve a problem! 

Naturally, there is much more to an aircraft hydraulic system than just this reservoir.  There are pressurized reservoirs, hydraulic fuses which close if hydraulic fluid starts flowing above a certain rate, and redundant hydraulic systems found in airliners. 

If you're inclined, you can read up on aircraft hydraulic systems with the FAA handbooks found at this link.  The PDFs are free, so there's no reason not to take a look!


Monday, July 30, 2018

Fusion 360 - Keyboard Shortcuts are here at Last!

Last week, Autodesk released a new update for Fusion 360, and while there's a few updates, the one that's getting the most attention is the addition of keyboard shortcuts.

Creating a shortcut

Now, if you'd like to setup your own custom shortcuts, you have the freedom to do it.  Just start a command from the pulldown menu, and click the "3 dots" on the far right of the toolbar.

Click the dots1

Now the Change Keyboard Shortcut dialog appears, and you can type in the shortcut to almost anything.  In this case, I chose to use "Shift+R" for a 3 point rectangle. Then hit OK, and you're ready to go

Changing the shortcut
You may have seen that I typed "almost anything" in the above paragraph.  There are some reserved shortcuts that can't be changed.  Among them are the standard Windows shortcuts, such as CTRL-S for save.  There are also shortcuts reserved by Fusion 360.

Man!  I'd love to make "S" a shortcut for "Create Sketch"!
And if you don't like any of the shortcuts you've created.  You can always restore to default! 

And finally, this wasn't the only enhancement to be introduced in this release, for the rest of them, follow this link here!


Wednesday, July 11, 2018

Dropping by the Pasadena 3D Printing Meetup

Some very cool 3D Printed Dice
It's said that we should learn from others mistakes, because we won't live long enough to make them all ourselves. 

It was in this spirit that I attended the Pasadena 3D Printing Meetup in Southern California.  Having picked up running a 3D printing machine recently, I've been trying to do what I can to learn as much as I possibly can.

And the group delivered.  There were several knowledgeable people who were happy, even excited to share their knowledge.  I got some great ideas on different materials to try. 

I was even able to share a little of my knowledge with new users.

This was followed by a presentation by Tracy and Tom Hazzard, who talked about the trials and tribulations of running a 3D printing business.  And they have experience, they run 3D Start Point.

Tom talked about building his own support structures, instead of letting the machine build them.  His goal was to reduce cleanup as much as possible.

There's some food for thought!

Probably the single best take away?  Tom and Tracy run a 3D printing podcast!  I've already looked at the first few episodes, and I'll be adding this to my regular podcast rotation!

It was well worth spending an evening with the group.  It's one I'd encourage you to attend, if you're in Southern California. 

And if you're not in Southern California, see if you can find a group in your area.  Meetup.com can be a great resource for that.

Here's a few more pictures from the group.  Enjoy!

And let's get out there and make some stuff!

A sample of PETG or PLA.  I can't remember which now.  I like the.
surface finish, and a lot of people recommend PETC

Another PLA/PETG sample.  I told myself I'd remember which was which.
I was wrong. 

A 3D printed tie.  It's printed in one piece and is wearable.
Tom Hazzard wore one for his presentation. 

A 3D printed bracelet printed by the Hazzards for their daughters wedding.
It was a wedding favor o the female guests.

A 3D printed bow tie.  This was printed as the wedding favors to the male guests.

The bow tie with support still attached.  This is the bow tie where
Tom Hazzard elected to keep the supports attached

Rope knots printed by Shorey Designs as part of a test.  The "fuzzy" rope on the
left has absorbed moisture form the atmosphere, the one on th eright was dried before printing.
That filament dryer I've heard about might be worth it. 



Thursday, July 05, 2018

Sharing a Short Lesson on Flared Tubes in Fusion 360

It's been a while since I've posted.  New projects and a different path of life have kept me away from working on "bloggable projects".

So I now share only the occasional post, and I hope that you find these posts helpful.

The other night, I was "doodling" in Fusion 360, and decided to model a "semi-rigid tube", similar to what one might find in an aircraft or some automotive applications.   It was good to get a little practice.


A typical 37 semi-rigid tube

And I found a couple of things that were worth documenting, at least for me.

Background on the Part.

In real life, a semi-rigid tube of this type is composed of a seamless tube, typically made from aluminum, or stainless steel, although other materials are sometimes used.

The flare is backed by a sleeve or "ferrule".  This reinforces the flare.  This design also greatly reduces the possibility of "wiping" damage to the flare, since the nut doesn't turn against the flare itself.

So that's why the design is made the way it is!

The Part in Fusion 360   

The part isn't complex, it's just a path created using a couple of 2D sweeps.

The flares at the ends of the parts are revolutions.  Just like the paths creating the sweep, there's nothing earth shattering if you're familiar with the tools

One thing worth noting, I downloaded the flares and sleeves from McMaster Carr, using the tools built right into Fusion 360.  That's a nice feature that simplifies downloading and inserting standard parts.

Inserting from McMaster Carr


I wrote about that tip here in a post a little ways back.  You can check out that post here.

And by the way, here's a link to the part.  Feel free to download it and take a look at it!



A Few Other Notes


  • McMaster-Carr actually didn't have the fitting I needed.  I wanted the fitting in aluminum, which does exist.  So I used a steel part and changed the material.  Yes.  In this case, I'd probably have to go elsewhere to purchase the part. In my case, Aircraft Spruce.  Sorry McMaster, I love you, but you didn't have what I needed in this case.


  • The parts from McMaster weren't modeled quite right.  There's some interference with the threads and the ferrule, and the flare on the ferrule is actually 30 degrees, not 37 degrees.  But how much does it matter?  If the purchased parts are correct (which they should be), then the fact that the models are slightly incorrect won't make much difference.  But it is noticeable in the cross section.


  • Aircraft tubing is sized using a unique numbering system.  The tubing (and hardware) are assigned a number, such as 3, 4, 5, etc.  If you take this number and divide it by "16", you'll get the outside diameter of the tubing in inches.  So #3 tube is 3/16, #4 tubing is 4/16, or a 1/4 inch, and so on.  The hardware is often number the same way. 


  • Aircraft tubing is also flared to 37 degrees, not 45 degrees as may be found in other applications. Just in case anyone is wondering why I'm using that flare!
  • If you're interested in learning more about flaring, here's a nice video that shows the process of flaring the tubes.  It's worth a few minutes of your day! 


In Conclusion

I started this project out as a bit of practice, as I said, it was an elaborate doodle.  But I had the chance to try a few tricks, and I thought I'd share them with you.

So go ahead and download the part, and have a little fun with it!

Sources and Acknowledgements

Flare Dimensions are from HylockUSA.  They also have the dimensions for metric flares!

Part Models are downloaded from McMaster Carr.

Wednesday, April 18, 2018

A New, Improved Hole Tool for Fusion 360

While I don't get to use Fusion 360 as much as I'd like to, I still keep track of it's goings on.

And improvements to the hole tool has been one I'm waiting for!  They've integrated threads into the hole tool

Holes and threads in the same dialog box now.
It's 

I grant you, I don't think much new was added.  But now, instead of having to create a hole, then go to a separate thread tool to add screw threads, it can all be done from one dialog box.

The new thread dialog box and thread section

I'm sure there's a corporate buzzword for this, like "synergy", or "paradigm shift", or maybe even  "synergistic paradigm shift in the way we shift or synergistic paradigms".

Who knows?

But I just think it's going to make adding threaded holes a lot smoother.  I'm looking forward to giving it a try when I have an opportunity.

While true enough, I don't get to use Fusion as much as I would like, this tool is making me want to make more time for it!

And there's more new tools to check out with Fusion 360!  You can see the full list of whats new in this update at the link here!

But on this night, it's time for bed, much like my kitty cat "Runtley the Runtling" is telling me!




(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAACwAAAAsCAMAAAApWqozAAAABGdBTUEAALGPC/xhBQAAAAFzUkdCAK7OHOkAAAAMUExURczMzPf399fX1+bm5mzY9AMAAADiSURBVDjLvZXbEsMgCES5/P8/t9FuRVCRmU73JWlzosgSIIZURCjo/ad+EQJJB4Hv8BFt+IDpQoCx1wjOSBFhh2XssxEIYn3ulI/6MNReE07UIWJEv8UEOWDS88LY97kqyTliJKKtuYBbruAyVh5wOHiXmpi5we58Ek028czwyuQdLKPG1Bkb4NnM+VeAnfHqn1k4+GPT6uGQcvu2h2OVuIf/gWUFyy8OWEpdyZSa3aVCqpVoVvzZZ2VTnn2wU8qzVjDDetO90GSy9mVLqtgYSy231MxrY6I2gGqjrTY0L8fxCxfCBbhWrsYYAAAAAElFTkSuQmCC); display:block; height:44px; margin:0 auto -44px; position:relative; top:-22px; width:44px;">
,sans-serif; font-size:14px; line-height:17px; margin-bottom:0; margin-top:8px; overflow:hidden; padding:8px 0 7px; text-align:center; text-overflow:ellipsis; white-space:nowrap;">href="https://www.instagram.com/p/BhvYWZxAYmE/" style=" color:#c9c8cd; font-family:Arial,sans-serif; font-size:14px; font-style:normal; font-weight:normal; line-height:17px; text-decoration:none;" target="_blank">A post shared by Jonathan Landeros (@jlanderos1973) on ,sans-serif; font-size:14px; line-height:17px;" datetime="2018-04-19T05:30:04+00:00">Apr 18, 2018 at 10:30pm PDT</blockquote>

Friday, February 23, 2018

Getting Inspired - The SpaceX Launch on February 22nd, 2018

Yesterday, I was fortunate enough to be within sight of  the SpaceX launch from Vandenberg Air Force Base in California.  I was about 150 miles (240 km) to the south, which is easily in sight of a rocket shooting into space,

I was also lucky enough that the launch was scheduled for early morning, before the sun had fully risen.  So we were able to look up into the sky and see it.

Here's the video I captured as we stood on the balcony at work and watched it go.

The video quality isn't fantastic, but I thought it was worth sharing.

It was an inspiring sight to see!  Enjoy, and get inspired too!


Wednesday, February 21, 2018

A Welding Class is Over - And Now its Time to Think of New Directions

Wow, it has been a while since I've blogged.  

In that time, I've been busy in school, where I took a class in Oxy-Acetelyne welding, as well as Tungsten Inert Gas (TIG) Welding, in both steel and aluminum. 



It was a lot of fun, and a big lesson in how much skill goes into making a truly high quality weld. 

I blew quite a few holes in aluminum trying to get there! 

My best TIG/GTAW weld. 
You should see how I started!
(No you shouldn't!)


If you spend much of your time building parts in the computer, I'd encourage you to step into the shop and learns what it takes to make computer models reality.  

As designers, we should all spend some time in a place like this! 


You won't regret it!
I've been reflecting, and not the same reflecting
you see in my welding lens.

But in that time, I've come to realize that I've been neglecting InventorTales.  

My energy has been devoted to work, and school, which means my time with Fusion 360, Inventor, and Vault has suffered. 

My postings with Inventor have ground to a halt, mostly because most of the work I do with Inventor must remain behind the "Walls of Proprietary Design", and I'm not able to share my lessons as easily.  

That has caused me to rethink the direction of InventorTales....

And I've concluded it's time to step back from it a bit.  

This isn't the "Farewell" post.  I'm not shutting the blog down, I'll continue to maintain it for the foreseeable future.  I've been fortunate enough to provide information that's been helpful to the community.  I hope it continues to help in the future.  

It's been a great run for the last few years, and while I'm not going away, I'm going to admit it's time to take a "mental sabbatical"  

I intend to continue to post occasionally, and share some of the new lessons I've learned.  

Thanks for a great few years, and I'll be seeing you out in the 'Verse as I discover what new form the blog should take! 

Monday, January 01, 2018

Using the Fusion 360 Data Panel to Search for Components

Sometimes a part number etches itself in my memory so well, it seems like I'll never forget it.  I know that an MS20470AD4-4 rivet is a universal rivet with a .125 inch diameter head, and is .250 inches long. 

Other times, I couldn't remember a part number to save my life.  It really depends on how often I work with a given component. 

This is the first Fusion 360 component I've created in a long time! 
The parts I create in Fusion 360 tend to fall into the latter category.  I find I'm creating parts when I have time between work and my school studies. 

That means I need to find an effective way to find parts when it comes time to look for them again. 

The thing I found that helps is to include a short description with the part number in the component name. 

Typing the part number, and description in the name.
It helps when searching for files when the part number escapes me, which it often does.  Fortunately, Fusion 360 provides a means to search a project using it's name.  It's accessed by clicking on the magnifying glass shown in the image below .

Choose the magnifying glass to begin a search.

Next, the scope of the search can be controlled by clicking on the pulldown menu.  All your Fusion 360 can be searched, or just a given project, just choose it!

Choosing the scope of data to search.
Once the scope of the search is selected, type in the data to be searched for, it can be any part of the description.  It doesn't have to be complete.  Just a portion of the data will do!

A list of data meeting the search criteria will be shown. This includes the component I created at the beginning of this blog.

A successful search.
Now double  clicking will open the component.  Or if you prefer, right clicking will show multiple functions for the component.  The same options if you had navigated to the file manually!

The right click options are highlighted in yellow.
So give this a try when you need to find a component quickly.  I know it's helped me find components after I've been away from Fusion 360 for a while!
 
And last of all, I'd suggest adding the part number, assuming you have one, the other thing I suggest is keeping the file description as simple and effective as possible.  I like to use a description similar to what I would put in a drawing title block.

Good luck in your design and data managing challenges!

Sunday, December 24, 2017

A Quick Post for the Holidays! - Improvising a Hole Gauge

It's been busy for me getting ready for the holidays, but I did have one little tip when your practicing the future of making things.

I found myself needing to double check a hole size.  All I needed to do was to check to see if I #6, or a #8 screw would fit in a hole in a simple bracket.

Normally, I would check it with calipers.  I'm used to being able to do that.  I almost always have them available.  Almost...

Dial Calipers, similar to my set.  These are perfect for measuring small holes,
but not when you don't have them with you!
Image Credit: Wikipedia
But today, I didn't have calipers my calipers.  They were at home, and I wasn't.  So what to do? 

I realized what I did have, was a full drill index (fractional, letter, and number drills!).  In other words, a full set of improvised hole gages!

My set of hole gages!  They can also be used to drill holes! 
I just placed a few drills in the hole I was checking until I got one that told me what I needed to know.  The hole was too small for a #8 screw.  I had to get some #6 screws to do the job. 

It's not a perfect fit, but it's enough to tell me only a #6 screw will fit.
A #8 is too big. 
So as your working in your own shop, remember that while you may not have the perfect tool for the job, with a little improvisation, you may have a perfectly acceptable substitute! 

Sunday, December 10, 2017

Lessons from the Real World - The Folly of Ignoring the 7Ps

There's an old saying about the "7 Ps".  To put it bluntly, the 7 Ps are: " Proper, Prior, Planning, Prevents, Piss, Poor, Performance".  I remember my Father mention mentioning it in reference to his old U.S. Navy days.

But last week, I made the mistake of ignoring the "7 Ps".  I allowed myself to fall victim to the perfect storm of laziness and complacency.  The true frustration of the situation was that I was left with nobody to blame but myself. 

Unfortunately, there's no pony to blame this time.
It was simply: My. Own. Damn. Fault.

It started with my girlfriend's car due for an oil change.  It's automotive maintenance that I've done for about 30 years.  I can do it in my sleep.  Which introduces the first demon to the equation.  Complacency.

I had the oil, I had the filter, all I had to do was get my girlfriend to leave me her car so I could change the oil.  I can do it in about 20-30 minutes, and that's taking my time to make sure I do it right.

No problem, right?  Well, remember that demon of complacency I welcomed into my world?

My girlfriend takes my truck to work so I can work on her car, easy money, as they say.  So I grab  the oil, and grab a few tools out of my toolbox, and get started.

Sure, I grab the drain pan, and the required tools, I have the oil drained in no time.  Then I realize I left the oil in the house, so I go inside to get that.  While I'm at it , I grab a few extra paper towels, I don't have enough in the garage.

The second demon of laziness has joined the party, I was too lazy to gather up everything I needed ahead of time.

The oil filter, safe on the center
console of my truck
So I move on and remove the oil filter, and realize I need to go the the oil filter too.

And that's when it dawns on me, the oil filter is in the truck.  The truck that my girlfriend took to work!

So with the oil now drained out of my girlfriend's car, I ended up taking a lovely stroll to the nearby parts store to purchase another filter.   It was on that stroll through my fine town that I was able to contemplate my mistake.

Thankfully, it wasn't long before I had completed the job.  I had to take a moment to sit down and have a laugh at my own expense. 

So what was the lesson, and the point of writing this out?  What did I learn on my Hobbit like unexpected journey to the parts store?

I realized that I had become so intent on executing my plan, I didn't actually have a plan.  It was really more of a goal of changing oil, with the execution limited to "I'm going to do some "mechanic" stuff!" in the middle.

Normally, I lay everything out before I get started, should it be a tool, a filter, or fresh oil, it's right there when I needed it.

But this time, I broke that routine.  I still had oil in the house, not all the paper towels I needed, and fatefully, the filter in a car that wasn't there.  I found myself making extra trips to get supplies that I didn't have laid out.

Had I laid everything out like I normally do, I would have realized I didn't have the filter and could have easily fixed the problem before getting started.

But I didn't, I started before I had everything laid out, and paid the price.

I think that happens to many of us in our endeavors.  We want to see action and measurable progress, so we jump to the execution stage, neglecting the planning, or "laying out your tools and supplies".

And we end up seeing action alright!  We end up acting, and then we end up reacting as we redo our efforts and end up having to adapt to challenges that a little extra planning may have foreseen.  We "take that walk to the parts store".

I'll be sure not to let this mistake be made in vain.  The next oil change, I'll have everything right where I need it, like I have in the past.  It will be a final "sanity check" to make sure I'm truly ready to execute.

And I'll be taking that lessons to other projects in my life, making sure to put the extra effort into minding those "7Ps" next time!

Please learn from my mistake, don't fall into the trap I fell into!


Don't confuse action with progress!

Wednesday, December 06, 2017

Lesson's From LIfe's Workbench - Working with Helical Inserts

Ahh. The helical insert.   If you've run into a mangled thread, there's a good chance you've had to use one.  Most likely it's come in the form of a tightly wound, diamond shaped wire which forms the insert.

The common helical-insert.
By The original uploader was Boellhoff at German Wikipedia - Transferred from de.wikipedia to Commons by MichaelFrey using CommonsHelper., Attribution, https://commons.wikimedia.org/w/index.php?curid=7363606


You may also know them as "Heli-Coil" inserts.  Heli-Coil is actually the name of a specific brand of helical inserts, but the names have become interchangeable, much like Teflon (PTFE), Kleelex (facial tissue), and Inconel 718 (Nickel 718).

Many of us have used them to repair stripped threads, they can also be used in softer materials, such as aluminum, to create a more durable thread.

A helical- insert used to repair a thread.
But like any fastener, they need to be placed into a threaded hole, which requires drills to tap holes, and depths for threads

Luckily, I found a great website that has the recommended taps, and hole diameters for helical inserts.

Our friends at Noble Aerospace have provided a recommended drill size chart, and a tap chart for both Imperial and Metric threads.

It's a nice resource if you're using helical inserts in your next design!

How Noble of them indeed! 

Additional photo credits:

photo credit: rustyheaps Repairing exhaust manifold, XK engine via photopin (license)

Monday, December 04, 2017

A 3D "Doodle" with Simulation in Fusion 360

A few days ago, an experienced engineer was explaining to us how changing the geometry of a component could affect the loads that it could have on how a part could handle the forces placed upon it.


Where the conversation started.
The representation of the mounting foot.

He explained that adding ribs to a mounting foot could greatly change how the mounting foot absorbed the loads, making for a more durable part. 

The modified part with ribs encompassing
the mounting hole.
So on this night I decided to build two parts pictured above,  and applied the same load of 1500 psi to them using Fusion 360.  I thought it would be a good exercise, and an opportunity to validate what I had learned.

The hole diameters and positions are the same, as well as the face bearing the load. 

After fixing the parts in the same place, I ran a simulation to see what would happen.

And the results of these quick tests was pretty interesting!

The ribbed foot had a much higher safety factor than the non-ribbed part.

The two parts next to each other.
The difference 
It was a nice exercise and validation of a concept.  And it was nice to have Fusion 360's simulation capabilities to be able to quickly test out an idea and quantify it.

Best part is now I have these parts for reference later!

It's just like a 3D note!

And finally, if you'd like to download the parts I created, you can find them here and here!

Wednesday, November 29, 2017

Lessons From Life's Workbench - The Blind Rivet

Over the last few weeks, I've mentioned how solid rivets are sized by part number and selected for diameter and length.

Solid rivets joining two pieces of
aluminum together. 
Solid rivets are amazing little pieces of metal.  They've been used in aircraft for decades, and if you've flown on an airplane, the odds are you've been depending on these little pieces of metal to ensure your safe flight.

And while these pieces are amazing in both their simplicity and effectiveness, like anything, they are not without their drawbacks.

They're inexpensive, but they require a certain amount of skill to properly set.  Proper riveting takes practice, and I found if I don't do it for a while, I have to shoot a few practice rivets to get "back into the groove." 

The other problem is access to both sides of the part are required.  The rivet has to be "shot" with a tool from one side of the part, and "bucked" or set, from the other.

If you're curious about seeing how solid rivets are set, the Experimental Aircraft Association has a great video explaining that here!

Moreso, it's likely that one person won't be able to reach both sides of the parts to be joined.  That means that two people are needed to set the rivet, a "bucker" and a "shooter".

Two workers setting solid rivets.
If you take a couple of moments to think about that, what you have is a rivet that maybe inexpensive, the workers required to place will be where the expenses will be found.

The blind rivet, also known as a "pop" rivet or "Cherry-Max" rivet solves both of these issues.  'For trivia's sake, the name "Cherry-Max" is derived from Cherry Aerospace, a prominent maker of  blind fasteners.

These rivets have a metal stem (mandrel) that is drawn through the rivet by a special tool.  The metal stem expands the rivet as it's pulled expanding the rivet and setting it in place.  The stem breaks off inside the rivet, adding to the rivets strength.

A blind rivet diagram.  Image from FAA Advisory Circular
AC43.13-1Bhttps://www.faa.gov/documentLibrary/media/Advisory_Circular/AC43.13-1b.pdf


The advantage of these rivets is they don't require the skill that a solid rivet requires. They also don't require that the part be accessible from both sides.   The drawback of these rivets is they are much more expensive than their solid counterparts.

A blind rivet tool, with unset blind rivets under the
"Design Differently" sticker on my laptop.
So like in so many cases in design and manufacturing, a benefit isn't seen without making a concession somewhere else.  So when all is said and done, you can still find both types of rivets in widespread use.

If you're curious about how to set blind rivets, here's a link to a great video here.

For more information on selecting blind rivets, check out the process guide  provided by Cherry Aerospace at the link here.

I  leave it to them to provide the info for you!   Mostly because I have to review it myself to refresh in my own memory!

But there you have a few of the "wheres and whys" of rivets.  I hope the info I've compiled here helps you out!

Photo Acknowledgements:

photo credit: The Library of Congress Riveting team working on the cockpit shell of a B-25 [i.e. C-47] bomber at the plant of North American Aviation, Inc., Inglewood [i.e. Douglas Aircraft Company, Long Beach], Calif.   (LOC) via photopin (license)