Find us on Google+ Inventor Tales

Monday, December 19, 2016

Aircraft Maintenance Class - Done for Now!

InventorTales has been a little quiet for the last few weeks, and that's because I've been head down in Aircraft Maintenance classes again.

It's fascinating, and, at times, frustrating.  It meant an additional 25 hours per week in class on top of the 40 hours a week I put into my day job.



The lab at Mount San Antonio College where I learn how airplanes tick.

It's fascinating, and, at times, frustrating.

It was 12 long weeks of studying sheet metal, metal alloys, wood and fabric construction, and composites.  

Those classes gave me lessons that will go far beyond the classroom.



There is more to laying out rivets than meets the eye...

But I don't want to turn this into bragging about what I did in class.  What now for InventorTales?

I'll have the next few weeks off of class, and in that time, I'm planning on getting reacquainted with Fusion 360, and sharing a bit of what I learn.

So stay posted, and enjoy this holiday season!


Sunday, November 27, 2016

Three Things Safety Wire Taught Me About "How Hard Can it Be?"

My aircraft maintenance classes at Mt. San Antonio College, and yes, that does reduce my blogging time still!  

But it keeps me learning, and in this short post, I'm sharing a bit of my experience with a cocky phrase I think all of us have encountered at one point. 

How hard can that really be? 

For me, safety wire was one of those cases.  Deceivingly simple, there's a lot more that goes into it that what first meets the eye. 

An example of safety wire on a fuel totalizer.
It looks like twists of wire, but there's much more to that. 

So what is safety wire?

Also referred to as "lock wire", safety wire is what is called a positive locking device.  It serves the purpose of preventing a fastener from loosening or falling out, and also serves as a witness that the fastener has been properly torqued. 

That covers the "whys", but what about the "hows"?   It's the "hows" where the hidden challenges in the process begin to reveal themselves. 

From the Federal Aviation Administration's book AC43.13, here are the requirements for proper safety wire installation on an aircraft. 

  • Safety wire must be installed in such a way that the fastener cannot loosen. 
  • Safety wire must have 6-8 twists per inch.
  • Never overstress safety wire. It will break under vibration. 
  • Wire must not be nicked or kinked, that includes backing off twisted wire if you've twisted it too many times.
On top of that, there are diagrams upon diagrams of examples displaying the proper procedure for various types of applications.  

An example of some safe wire combinations
From AC43.13
For me, that meant making a lot of mistakes.  I've gotten the wire too loose, I've kinked the wire, I've even gotten the direction backward, loosing the fastener instead of tightening it. 

And all of that means grumbling in frustration, cutting it off, and doing it again. 

So what does that mean for those of you out there?  Many of you will never touch safety wire, and that's alright.  It may not be your thing.  

But one lesson from a few twists of wire can be summed in a few simple phrases.  

Just because it looks easy, doesn't mean it is.  And if someone makes it look simple, it may be that they've been honing that skill for years. 

And that can be true of an task, be it safety wire, welding, running a CAD program, or installing a data management system.  

So see the world with an eye for learning from those experts! 


Acknowledgements:


 

Sunday, November 06, 2016

How the Cloud Saved my Butt - And my Homework Grade

I'm still taking my aircraft maintenance classes at Mt. San Antonio College.  And while it's rewarding, it's enormously time consuming.

Between work and class, it means days starting at 5:30 AM and ending at 11PM.  It makes me grateful for a supportive family, but something does have to give, and in this case, it's the blog that suffers.   

One of the instructional airframes, the Cessna 337 Skymaster.
But life is still teaching me lessons, and this is one where data in the cloud helped save my grade.

I store my homework in Google Drive.  Why?  I can access it anywhere, and it's always backed up.  It's always nice to be able to open the latest version on my phone, laptop, or work computer, without having to worry about uploading or emailing documents. 

And as a final bonus, I have semesters of homework available for my reference.


The infamous textbook.  My dinner companion many nights.

Perfect cloud application, right?  Of course!

But last week, I had an interesting experience that thankfully, the Cloud saved me from. 

In a rush at work, I hurriedly printed and stapled my homework to turn into class.  Once turned in, I went merrily on  my way, satisfied with a job I thought well done. 

But the next day, I got a surprise that made my stomach sink. 

The instructor returns my homework with a 43% on it.  I'm shocked!  How?

He tells me, "You're missing half your homework."  

Gobsmacked, I flip through the pages.  Sure enough, two of the four pages are blank.  

I kick myself for not checking.  It's a stupid mistake. 

The teacher breaks me out of my trance.  "I don't know how to rectify this with you.  The quality of work implies you did the homework, but if you can't get it to me tonight.... "  

My brain races, and suddenly a solution.  "Can I email it to you?"  

"I'll take that."  The instructor tells me, giving me a ray of hope.

I fumble with my mobile phone for a few minutes, and manage to send a *.docx file to the instructor.  Mercifully, my grade goes from a 43% to an 83%. (I made some bonehead mistakes technology can't solve). 

So that's my story, but what are the lessons?  

1) Technology is awesome!  But don't rely on it too much. - I didn't spend 10 seconds flipping through the pages of my homework to make sure it was all there.  I assumed it was, and that nearly cost me. 

2) When used properly, technology is  invaluable. - As contradictory as it seams, technology also saved me from... technology.  If I hadn't been using a cloud account, and instead had my homework stored on a document on a machine, I may have been stuck eating a failing grade.  By having the ability to send the instructor a word document, I salvaged a bad situation. 

3) Make Technology Work for You! - I think this is the biggest lesson of all.  We all have different needs, and technology has many ways of helping us out, not just one.  Just because I use it one way doesn't mean you have to use it in exactly that way.  Take my ideas, combine them with so many others, and come up with something that makes you're life easier! 

So take my lessons, make them your own.  From now on, I'll be double checking that homework with my good ol' "Mark 1 Eyeball.". 

Sunday, October 09, 2016

I'm Back in Class - Why You Haven't Heard from Me

I know it's been quiet the last couple of weeks.

But it's that time again, I'm back in Aircraft Maintenance Class trying to gain some new skills.

A "Special Fasteners" plate. I learned that safety wire
is both an exercise in patience, and p

The back of the plate shows just *some* of the fasteners
found it a typical aircraft. 

That means working a full week, plus running to class to put in an extra 25 hours per week.

Needless to say, I don't have much time to sit down and blog!

But I'm learning new skills and finding new ways to apply the skills I have.  It's a great experience!


Learning to hold a part with Clecos (the copper pegs), before setting solid rivets.
And I'm already dreaming of a few new posts! 

You haven't gotten rid of me that easily.


Friday, September 23, 2016

A Little Glitch in the (A360) Matrix

Sometimes, the internet hiccups. And I found that happened with my Autodesk A360 account earlier this week.


This is *not* a glitch in the matrix.
I have three black cats.
Friday, I was going to log into my A360 account, and all I saw was the login screen.

Seeing how this is a normal thing to see, I logged in, and waited for A360 to do some technical things.

This before login is normal.


I wait excitedly to be greeted by the wealth of my accumulated information, and what do I see instead?

Seeing this after login is NOT normal!


That's right!  I loop back to the login screen!  It's about 10:30PM.  So I give up and go to bed.  Maybe the next day will fix it.

I try it again on the following day, and I still get the same thing.  It's time to ask Google!

And Google yielded some results from the Autodesk Community itself.  

You can read the thread at the link here, and I encourage you to do so!  

But here is the summary from that page.

The solution!
I tried it, and that solved it!

I was running Google Chrome, to clear your browser history in that program, hit CNTL+H, and choose the Clear Browsing Data button.




Then shut down your browser, and restart it.  Try logging in again, and the problem should be solved.

So if you're running into this issue, give this solution a try!

Tuesday, September 20, 2016

A Fusion 360 - Quick Tip on Showing Modeled Threads

It's sizing up to be a hectic week, but here's a really quick tip I discovered while creating some aircraft fluid fittings in Fusion 360.

A typical 37 degree flared fitting.

Did you know that while creating, or editing threads, you can change whether the thread representation is shown as a graphical representation, or as a modeled thread?

And you can toggle it off at will!

Showing the modeled thread location.  Right click (1), and check (2)!

Check it out, and give it a try!  When rendering models, this can make the difference between an average rendering, or a great one!

When you rendering without the threads displayed....

Not a bad rendering, but something is wrong.....
But now if you check that one simple box....

Now that's a big difference! 

Keep it in mind for a time that you need it!

Tuesday, September 13, 2016

Two New Members, and Maintenance on "Websites Jon Likes"

A few years ago, I added a tab to InventorTales I named "Websites Jon Likes".

It contained resources I found helpful, or just a little interesting, and I just wanted to share them.

That page was long overdue for some maintenance, and so I finally cleaned it up.

I removed a few links that have gone dead.  The sites have now become the ghost of webpages past.

But two more sites were added, and for all the value I think they bring, I wish them a long and prosperous existence.

Here they are!

AIRCORPS Library   



An example of what you can find on AIRCORPS Library

The owners of this site have diligently collected and scanned prints and technical documents for aircraft form the 1930s, 1940s, and a few in the 1950s.  I grant you, they're a pay site, but in my opinion, they have earned every cent they earned, plus more.

Most of us live life in the cloud, and this has got to be one of the greatest uses for it I have seen.

If you like old airplanes or vintage technical documents, then this page is for you!

Lazze Metal Shaping

This is a great YouTube channel with a video after video of detailed sheet metal work.   Most of the work uses manual tools like English Wheels, shrinkers, stretchers, and brakes.

Definitely old school, and definitely worth your time!

Here's a video I liked, but this is just a small sample!  Check out the site on Youtube!



So take look a these sites!  I think you can find something worth while!

Sunday, September 11, 2016

Constraining Content Center Components in Autodesk Inventor - An Alternate Way

Recently, I've been doing a lot of work with content center lately.  I've been building content, publishing content, and fixing content.

It can be tedious, but it can also be a lot of fun.

But there's one trick I've picked up in my travels.  It's how to constrain content, in particular custom content, a little more quickly than by using the standard method.

Now before I get started, one disclaimer.  I'm using standard content to demo my blog, I didn't have customer content center fasteners I could share with you, so I had to borrow the standard.

Since I'm using standard content, I also I know I could use Autodrop, but the point was to show an alternative.  All I ask is you bear with me on the standard content part.

So with that said, it's time to get started.

Of course you'll need to place your content from the browser.

Selecting content to place

2) When the fastener previews, right click and choose the size you want to place.

Choosing the size of your content center fastener

3) Next left click to place your fastener, but here's the trick.  Without you even knowing it, the insert constrain is active.  Before you left click to place the next fastener, left click under the head of the fastener you wan to place.

Selecting under the head of the fastener
4) Now select the mating hole, the insert constraint will be created!

Completing the constraint with a second click on the mating hole
5) All that's left is to repeat the steps if you have multiple fasteners!  You don't have to exit the command!

Repeating the step for multiple fasteners. 
So give it a try if you have content you're using, particularly custom content.  I've found it helps me out, I hope it does the same for you!