Find us on Google+ Inventor Tales

Monday, May 28, 2012

Removing Features and Voids Using Autodesk Inventor 2013's Derived Component Tool

About that time, stronger features became fashionable on the screen.
Marie Windsor

Many of us have been there before.  We need to send our 3D CAD assembly to a 3rd party, like a vendor, for example.  But we don't want to directly export the full 3D model.

Why?  The 3D model contains all the information required to build the components within the assembly.  The "feature rich" assembly may be overkill because the extra information, such as internal cavities, may create a model that is "overly heavy and complicated" for the end user.

Even worse, giving them that feature rich model may give away proprietary information that may allow an unscrupulus end user to take advantage of our hard work.

Would you always want to send out a model with all this detail to a 3rd party>?


In older versions of Autodesk Inventor, you could derive the assembly into a part model, and use standard Inventor part modeling tools to remove the excess features.  You could even use Autodesk Inventor Fusion if you wanted.

But this process took time, and while it might be worth it to protect intellectual property, who doesn't want a faster way.

As of Autodesk Inventor 2013, there is a way.

To take advantage of this new tool, the model is still derived into a part file using the Derived Component too, just like before.

We still go into Derived Component


We can still go into the Options tab, and change how the assembly is derived and remove parts and features that we don't need.

But now check out the "Options" tab for the new options.

But a new option in this window is to remove internal voids that allow the part to be quickly simplified.  With the addition of this tool, manually filling holes, voids, and generally "dumbing down" an assembly can be reduced, or even eliminated.

Remove voids!  The new tool! 

So on that note, here's a video that shows both the steps, and the result of a quick simplification of a component.


Have a suggestion on how you approach this challenge?  Drop a comment below! 

Thursday, May 24, 2012

Where's my "Show All Constraints" Tool?!? - Autodesk Inventor 2013

“If we are facing in the right direction, all we have to do is keep on walking.”
Buddhist Proverb

Show All Constraints.  It's been in Autodesk Inventor since I started way back in the days of Release 4.  It was available from the right click menu, or by hitting the F8 key. 

The right click menu from Inventor 2012.  The "Show All Constraints" option is there like it's always been!

Just today I fired up Inventor 2013, and started up Inventor 2013, created a sketch, and right clicked to show all my constraints.


Guess what?  It wasn't there!  The hotkey (F8) still works, but it wasn't on the right click menu any more.



I puzzled for a second, then I face-palmed.

I remembered reading in the What's New for Autodesk Inventor 2013 that it was moved to the new Status Bar at the bottom of the screen!

I found it!

Along with the Show Constraints tool: some other familiar tools have been moved there (listed in order, from left to right):

  • Snap to Grid
  • Show/Hide All Constraints
  • Dimension Display
  • Slice Graphics
  • Show/Hide All Degrees of Freedom
And if you want more info on these tools, check out the Wikihelp here for the full rundown

But I like the old way better!

Now, I know that there are those out there who are asking; "Why can't we make it like it was in 2012 and earlier?"

If you are on that team, you're in luck!

Go to the "Tools' ribbon, and choose the "Customize" icon.

Choose Customize
On the dialog that appears, choose the "Marking Menu" tab.  Then in the lower left hand side, pull the fly-out open and set the Overflow Menu to "Full Menu".

Tada!
Click "OK" and the settings will be back to the older style settings!

Back to "old school"
So there it is, a few of the Inventor 2013 changes, and some ways to go back to your last release settings.

I hope the tip helped!

Sunday, May 20, 2012

Migrating Colors and Materials into Autodesk Inventor 2013

“A hard fall means a high bounce... if you're made of the right material.”

A new change in Autodesk Inventor 2013 is how materials and colors are handled.  Instead of being a part of the Styles and Standards libraries, like in previous versions of Inventor.  Now, they're stored in Appearance Libriares (for colors), and Material Libraries (for materials).

The location of the new libraries can be seen by looking at the project file.

The libraries as shown in the Project File
But what if there are old libraries that have been created over time?  We wouldn't want to throw them out and start over right.  So there has to be a way to migrate them, right?

Well, of course there is!  (or else I wouldn't have anything to blog about).

But how are the libraries migrated? 

It's fairly simple, once you know where to look, as I'm so fond of saying,

There are two places to access the Appearance and Materials Libraries.

The first is from the quick access toolbars.



The second, off the Tools Ribbon on the Materials and Appearance Panel.

On the Tools Ribbon
Choosing either icon will bring up the browser for that particular library.  

Migrating to both the Material and Appearance Libraries is a matter of clicking on the "gear" icon in the lower left hand selecting "Migrate Inventor Styles".

The dialog for Materials.  The Appearance dialog is nearly identical.

The source (the library to be migrated) is selected, followed by the destination library.

However, there are two destinations to send your migrated folder, one is to create a new library, the other, select an existing library.

So what to do?

There's two theories.  One is to migrate your old libraries to a newly created one, and remove the old Inventor libraries.  This makes sure you have "one truth" for those materials.

The other, is to merge them into the existing library.  The important, custom materials will be there.

Which did I choose?  Personally I used "Create New Library.  For me, it was a little easier to have that "one version" of the truth.  I can remove one library later if I don't want it.


Hit okay, and the migration begins.

Soon, the migrated Material Library is complete.

The best part now, migrating the Color Library to the Appearance Library.  Why is it so good?  It's basically the same steps!  If you've done the Material Library, you can do the Appearance Library.

Naturally, it wouldn't be a blog post without a video.  So here we go!


Do you have input on how you might have migrated your own libraries!  Throw a comment below!

P.S. If you're interested in how to migrate Dimension Styles, Sheet Metal Styles, etc.  Check out last week's blog here! 

Sunday, May 13, 2012

There's Been a Change or Two - Migrating Styles Libraries from Inventor 2012 to Inventor 2013

“Good as it is to inherit a library, it is better to collect one”
Augustine Burrell

When I first started working with Autodesk Inventor 2013, I thought that migrating the Styles and Standards (colors, sheet metal styles, dimension styles, etc), would be exactly the same as in 2012.

I even tried it, and everything worked fine. 

But earlier this week a KETIV colleague, Javier Chavez, asked me a question.

"Have you noticed that the Design Data folder was restructured in Inventor 2013?

I hadn't noticed the change.  But as we looked at Windows folder structure, discussed migration procedures, puzzled, and discussed some more, we found that the folder structure had indeed changed.

Notice the difference between folder structure in Inventor 2013 (left) & Inventor 2012 (right).


"That's going to make migration important."  I understated.

So I deleted my Inventor 2013 Design Data, and tried it again.  Sure enough, the process was different.

In brief, the biggest difference is Inventor 2012 (and earlier), migrated the data in place.  So you copied your old data to a new location, and migrated it there.

Inventor 2013 on the other hand takes your data and copies it to the new location, migrating it during the process. 

Source folder, destination folder, and a waiting migration button!

This was the difference I'd missed the first time.

So before I show you the video, here's one thing to always remember!

Have a backup of your Design Data folder! 

I cannot stress this enough!  If you make a mistake, you can always delete the migrated files, and try again with the backup you created. 

As a matter of fact, I did this several times testing out the migration to make sure what I thought was going to happen, was really what was going to happen.

As I was once told.  "If you think you don't need a backup.  Stop and ask yourself the following question.  When was the last time you regretted having a backup?"

In other words, make the stinking backup.  It takes a few minutes, and can save you hours of having to live in the "Purgatory of Data Recreation".







Monday, May 07, 2012

It's all over! The Planes of Fame 2012 Airshow.

"Is this old airplane safe? Well, my dear, how do you think it gotto be this old?"
Unknown

In my last blog, I said that there wouldn't be much Autodesk Inventor blogging today.

That's because this weekend was the Planes of Fame airshow in Chino, Ca.  It was a great weekend of volunteer work, that was exhausting, and exhilarating all at the same time.

And it always gives me pause to look up at the history in the air, and think of what it must have been like "back then".  I'm glad there are so many working to keep this history alive. 

So for your enjoyment, (if you'd like), here are a few pictures from the show. 

Once I catch up on lost sleep, and the pain of my sunburn fades, I'll be sure to have some more CAD stuff up! 

Until then, enjoy some warbird pictures!

Planes of Fame Airshow 2012

Friday, May 04, 2012

Save and Replace - Autodesk Inventor's Copy Component with a Twist

All the learning in the world cannot replace instinct.
Robert Ley

In my blog post last week, I talked about using Copy Component inside an assembly.  It's a tool I really like, and use frequently.

But if you saw the comments at the bottom of that post, there were some comments by some very astute user that spoke about "Save and Replace Component", and how they prefer it.

Save and Replace.  It's here, but hiding.
Now I'm not hear to tell you how "I'm right and they're wrong".  Why?  Because they're not wrong.  It's a fine tool!

Personally, I like Copy Component where I need to use both the original, and the copy in the same assembly. 

On the other hand, I like Save and Replace Component for those times where I need to create the copy, and swap out the copy with the original. 

The nice part about this tool?  It keeps the constraints intact.  So you don't have to recreate any constraints! 

This is where the real time savings begins.  Not to mention avoiding that monotony of having to recreate the constraints!

So here's a quick video to take a look at.  Let me know what you think about one tool, versus the other!

Have any thoughts on how you might use these tools differently?  Drop a comment!  I'd love to hear your thoughts!


P.S.  It's that time for me as a warbird geek.  This weekend (May 5th & 6th, 2012) is the Planes of Fame Airshow in Chino, Ca. 

I'm setting up Friday and breaking down Monday, so expect that my normal blog posts will be replaced by warbird pictures and geekiness until Tuesday, May 8th, 2012.

I hope you enjoy my "CAD hiatus" for the next few days.  If not, I'll see you next week, when I return to my CAD geeky self!

Until then?  Expect some tweets and maybe even a blog from the airshow! 

This will be my weekend!  Of course I can hardly wait!


Sunday, April 29, 2012

Using Camera Properties in Autodesk Showcase 2013

“A true photograph need not be explained, nor can it be contained in words.”
Ansel Adams

Autodesk Showcase.  When I first started learning it, about three years ago, I was told by my mentor:  "Remember that you want to catch the viewers eyes.  Take a look at how photographers use things like lighting and camera angles.

What he was trying to tell me during his explanation, was that I needed to break my engineer's brain of perspective and isometric views.  The goal is to create a rendering that grabs the viewers attention.

Some of the old tricks I learned, that I use to this day are playing with camera angles.  I'll adjust camera tilt, focal length. and sometimes height.

As a matter of fact I shared these tricks in a blog back in June of 2009 (see that post here).

Here's an example where I changed the camera tilt to add a more dramatic effect.

But now!  (drumroll)  In Autodesk Showcase 2013, there are some more options!  By going to the View>Camera Properties pulldown, there are more options are available.

The new camera properties.

 The new settings are for Image Control, and control the tone mapping for the rendering.  Now there are more ways to adjust the appearance and quality of your scene.

Here's an example of a few of the settings:

Compensation:  Think of this as exposure.  Make a scene brighter or darker with a slider.

A Showcase rendering with a compensation of 2.36


The same scene with a compensation of 1.36.  Notice that this scene is darker
Highlights, Midtones, Shadows: These three sliders affect the brightness and darkness of your highlights, midtones (similar to gamma control), and of the shadows in the scene.

Saturation:  A favorite for me.  I refer to this as the "Band of Brothers effect".  This WWII based mini-series subdued the colors to give it an aged effect.  This was accomplished by reducing saturation.  Showcase 2013 can do the same thing!

A scene with the standard saturation of "1.0"

The same scene, reducing the saturation to "0.5"


Color Filter:  Maps a new color to be "White".  It creates a different feel for the scene.

Changing the color filter of a scene
White Point: Shifts the white balance of the scene.  This can create a warmer or cooler overall feel for the scene.

An example of a scene shifted to the "full warm" setting.
Take a look at these settings, including focal length, and tilt angle too.

They can really add that extra pizazz! 

And now, the video showing the tools.  Give them a try in your next Showcase project!

Have some thoughts on how you make your renderings stand out?  Tell us how in the comments!


Saturday, April 21, 2012

It's Exactly Like That, Except.... - Copying Components in Autodesk Inventor

I am my own secretary; I dictate, I compose, I copy all myself.
Venerable Bede

Here's a quick tip on a tool I've found is sometimes overlooked.  Copy Component.

We've all been there.  A part has been modeled and used  an assembly.  But then another component is needed that's nearly the same s the one just finished.

But the functional word is "nearly".  It's not quite the same, there is a difference, perhaps slight, between two components.

So there's a dilemma.  The original can't be reused, because of it's not exactly the same.  But rebuilding the part is time consuming. 

Another option would be to go into Windows Explorer, copy the part file, and reinsert it into the assembly.

But that's a lot of steps.

This is where "Copy Component" comes into play.  A component can be quicky copied, placed in an assembly and reused.

Take this chest of drawers for example.  I've built some molding where the top meets the bottom.  The cross section of the components is the same, but the mitered cuts on the ends are different.

Why not use one part to create another!


In other words, the part is nearly the same, but not quite.

Copy Component!  Just what we need.

This is where Copy Component shows up and struts it's stuff.  A similar component can be quickly, and efficiently created without exiting the assembly model.

Using Copy Component to create a new part.

Unfortunately, it seems that this is a tool that a lot of users don't realize is there.  They're copying part files or recreated geometry unnecessarily. 

So that's why this video is here.  To "throw off the shackles" of unnecessary steps. 

Take a look at Copy Component, and use it to its fullest!


 Got a place or an idea where you used Copy Component?  Drop a comment!

Sunday, April 15, 2012

Downloading your Autodesk 2013 Software - Byte by Byte

“There is an unstoppable trend towards digital downloading of content.”
Phil Harrison

Many of us have already heard.  The Autodesk Design Suites are available from the Autodesk Subscription site.

If you're like me, you logged on as soon as you got to the office and.... and... waited....

There are a lot of great tools in the Autodesk Suites, but "with great power comes great responsibility".  Or at least  a great deal of bandwidth use.

I was downloading Autodesk Product Design Suite Ultimate.  Nearly 16GB of CAD designing goodness.

But like most of us from work, I can't go running around unplugging everyone's computer from the network proclaiming "Mine!  Your bandwidth is mine!"

After about 4 hours, I got one of four files I needed to download.  I started the other, but I realized I had a problem.

5PM was approaching, I was heading to Mammoth Mountain for a Snowboarding weekend, and I wasn't going to be done by 5PM.  And I wasn't hanging around for the download to finish!

I am not missing this for a download!

What do do?!?

Autodesk has a download manager for downloading their software.  The nice thing about the download manager provided by Autodesk is it will let you pause your download, shut down your computer, and restart it later.

But I couldn't get the Autodesk Download Manager to work on my version of Firefox 12.0, which is brand spanking new.  So I had to download using the standard browser method.

While I'm not positive, my Firefox version may have caused my problem.  I haven't had a problem with the Autodesk Download Manager before.  But with 5PM and some fresh powder calling my name, I'm not inclined to utilize the scientific method and research it.

But I have an idea.  One a whim, I check my Firefox add-ons and find that there's an add-on called "DownThemAll!"  It claims to have the capability of letting you pause a download and restarting it at a later time....

Well.  This looks interesting!

I stare at my laptop like someone disarming a bomb in a bad cop movie (Cut the blue wire!  No, the red wire!  NO! THE BLUE WIRE!)

It's crazy.  Just crazy enough to work!

I finally do what I didn't want to do. I CANCEL THE DOWNLOAD.  Two hours and a Gigabyte of data are flushed over the side. 

I install DownThemAll! and try the download again.  I special, different download manager begins, and I restart the whole process again.

Let's see how this works

A get to about the same point where I aborted before when 5PM rolls around.  I pause the download, shut down my computer, and race home.  Which in Southern California means driving at 20 MPH on a crowded freeway.

Once home, I fire up the laptop again, and restart the downloads on my Fiber Optic line, and start downloading again.



The downloads pick up again, and are done in about a little over an hour.

Once I arrive in Mammoth, I can't contain myself.  I extract the files, and install.

It all works perfectly.  The download manager did the trick!

So what is the moral of the story.  Downloading the information takes time.  There's no denying that, and it can be hard to tie up a system to grab a given file at once.

So if you have a hard time downloading your Autodesk products, try the Autodesk Download Manager, it's worked great for me in the past (I swear).

But if you're running a fancy new version of Firefox, or you have a hard time with the Autodesk Download Manager for some reason (stupid I.T. security policies), try another download manager.  It worked for me, and let me download my Autodesk software, and enjoy my weekend in Mammoth!

If you're running Google Chrome, it looks like they also have download managers available, although I've never tried them (click here for the link).

I wasn't able to find one for you I.E. users.  Sorry.  :-(

Got a thought or two?  Have a download method you prefer?  Share a comment.

BTW, I'm hoping for a video tip by the middle of the week!

Sunday, April 08, 2012

Autodesk Showcase 2013 - A Preview of a New Interface

Find the good. It's all around you. Find it, showcase it and you'll start believing in it.
Jesse Owens

A few days ago, I pulled the cover off my Autodesk Showcase 2013 installation, and took it for a test spin.

The first thing I found when I took a look, the user interface has changed.  It's subtle, but it is significant. 

There a new "Task UI" that's been added.
It's called the "Task UI", and it contains many of the functions normally accessed via hotkeys and pulldown menus.

The pulldown menus are also hidden now.  Although you can click on the arrow at the top of your screen to show them again.  All the hotkeys from Showcase 2012 are still there too.

The menus can still be viewed.
My "knee jerk" reaction was much the same as a lot of us.  I'll have to learn a new user interface. 

But I tried it for a little while, and I've found that it's not that bad.  It wasn't that long before I was starting to get used to it, and (gasp) starting to like it.

So here's a quick video I put together on the new UI.  It's just a preview.  But as I dive further into Showcase, I'll be sure to post some more!


Taken a look at some of the new features in Autodesk Showcase 2013?  Share you thoughts and drop a comment!

Friday, April 06, 2012

Autodesk 2013 - Server Not Configured Error?

“Life is measured by the rapidity of change, the succession of influences that modify the being.”
George Eliot

For about the last week, I've been working with Autodesk Vault 2013, and so far, I'm enjoying what I've seen. 

The new searching features are really slick, and the ability to login using my 2012 based products works nicely.  The adjustable grid views in open and place are super cool! 

But I did run into one thing that made me go "huh".

I right clicked on a folder to check a setting, and got a big "The server is not configured to use that feature" warning.


I go to my properties

Doh!  What's this?
 So I did what any self respecting geek would do.  I Googled it. 

It looks like Autodesk found out about it and issued a hotfix right away.  I found it, downloaded and installed it, and all was right with the world again.

You can download it from the link here! 

So should you be one of the users who finds this glitch, grab the fix, and everything should be fine after a few minutes!

TaDa!  It's working
P.S.  I've got some videos I've got planned.  It's just that the schedule hasn't been friendly to it lately!  But I'm hoping to get some new stuff posted soon!

Sunday, April 01, 2012

Going Forward! Installing Autodesk Vault 2013

Progress lies not in enhancing what is, but in advancing toward what will be.
Khalil Gibran

Late last week I decided it was time.  I upgraded my Autodesk Vault server from 2012, to 2013.

The process went through pretty darned smoothly.  I was able to get my Vault up and running no time, maybe an hour, give or take.  But I thought I share my steps and experiences.  So those of us who might be getting ready to take the same leap soon.

First a few explanations of what I was upgrading:
  1. Updating Autodesk Vault 2012 Basic to Autodesk Vault 2013 Basic
  2. I was upgrading my laptop, which is a server for only one user, myself
Of course your configuration may vary.  You might be running a configuration like mine, just one guy accessing a Vault for managing his own set of projects.  Or you could be managing dozens of users who are running a large Vault installation replicating across several sites.

So these steps represent my upgrade process.  I can't cover every contingency here.  So if you have any doubts, do a little extra research.  If you REALLY have doubts, call your friendly neighborhood Autodesk Reseller.  They can help make sure your transition is as smooth as possible.  

Next, here are some things I had ready, or planned for.

Have a backup!  
I can't stress this enough.  Even though I have never once lost a database or filestore during migration, you don't want to make any assumptions.  Should the worst happen, have a backup plan that includes having a backup to restore, instead of slipping out the back door before anyone notices! 

Be prepared for some downtime!
If the server is upgrading, files in Vault won't be accessible.  Make sure you have time set aside when everybody can be ready to be out of Vault for a few hours. Don't upgrade when you have a massive project due in fifteen minutes.  It's not a pretty sight when the engineering department shows up outside your office with torches and pitchforks.

 Be prepared for a reboot!  
This ties into the previous bullet.  The server may have to be rebooted, so be prepared for that too.  This is especially true if you have a server that's running processes other than just Vault.  Knocking payroll offline on payday can have unintended consequences (see torches and pitchforks above).

In short, a little caution goes a long way.

Now that that's said.  I have my backup safely tucked away.  My install is ready to go.  All I have to do is start pressing the buttons.

So what were my steps?

The first is easy.  I uninstall Autodesk Vault 2012 via Add/Remove in the Windows Control Panel.

Farewell, Vault 2012.
This will fire up the Autodesk Uninstall screen, where you can remove the Autodesk Data Management Server Console from your machine.


 Vault will ask you if you have a backup.  And if you haven't.  Make one!  Seriously! 


 Now you get to confirm you're going to uninstall!

 

Progress bars will do their "progressy" thing, and the Vault Server will be removed from the machine.  It's important to note that the filestore and database (which contain your valuable design data) are still on the machine.  

And Vault 2012 is off the machine!
Installing Vault 2013

Now we fire up the setup for Autodesk Vault Server 2013.  The setup starts up, and we see our first screen.

Here we go!  Vault 2013 going hot!
First you'll see the End User License Agreement (EULA).  I know that each one of you reads this diligently and takes notes before agreeing and hitting next. :-)

I agree to some legal things, and ZZZZZZZ... Oh!  A "Next" button!
Next the install options appear.  The options may vary based on your installation (SQL Server settings, new install or upgrade, etc).  Notice in my  case, the installation sees that the instance "AUTODESKVAULT" already exists.  This is my old 2012 database and filestore.

You know, the one that holds that critical engineering data?

Look!  A the instance is waiting to meet us!
The next option is what to install.  In my case, I'm not installing the ADMS Content Center.  I run my content off of the Desktop Content because I'm always testing different Vaults on my machine.  It's easier for me to maintain my content separately for these reasons. 




Clicking install starts process.  The first thing the install notes was that their is already an existing database.  The installation advises me that it may need to be migrated when it's done.  

This is expected in this configuration, and I go ahead and continue.

Yes! We must forge ahead!
Now the ADMS check starts.  Like a preflight check in an aircraft, this makes sure we're ready to go. 

In my case, two warnings were noted.  One was that a reboot was required.  The other was that a there was a failure in the ASP status.  One nice thing about this check is that if you click on the warning, it will take you to link of solutions for that error. 

Stuff needs to be tweaked!


In the case of my ASP error, I had to change the .Net setting in my DefaultAppPool from v2.0.50727 to 4.0.30319.  The instructions in the link showed me the steps I needed. 


Switching the pool
After a reboot, and repeating the steps above, I was able to run the install.  Now it was just a matter of waiting for more progress bars.

I hear gameshow music.

After a few minutes, the install completed.

Yay!
But we're not quite done yet.  Remember that warning about having to migrate databases?  If you don't, you'll remember it now!  Why?  Because Vault will remind you!

In my case, I wanted to get things rolling right away, so I started the server console.

We're not just flying South for the winter.
The installation wants to know if what we want to migrate.  I chose to migrate everything, vaults, and libraries.

We're taking the whole shooting match!
Now the migration begins.  It takes a little bit of time to migrate everything, especially if you have a lot of content center libraries.  In my case, I don't (remember I'm running Desktop Content?).

More progress bars appear as the migration takes place.


One more completion message, and the migration is truly done.  The Vault server is upgraded, and I'm ready to start using my new, migrated databases and filestores.

All done
So those are the steps for my Vault upgrade.  I wasn't expecting a reboot (although in retrospect I should have).  Fortunately, I knew I could reboot if needed.  It just meant I had to stay at the office a little longer to reboot my machine.

I hope you find the steps I used helpful as you plan your own Vault installations and upgrades.

For more resources, check out the following:

Autodesk Vault Knowledge Base
Under the Hood (Data Management/PLM blog)
Cracking the Vault (Data Management/PLM blog)

Have your own thoughts or suggestions from your own upgrades?  Throw out a comment below!