Find us on Google+ Removing Features and Voids Using Autodesk Inventor 2013's Derived Component Tool ~ Inventor Tales

Monday, May 28, 2012

Removing Features and Voids Using Autodesk Inventor 2013's Derived Component Tool

About that time, stronger features became fashionable on the screen.
Marie Windsor

Many of us have been there before.  We need to send our 3D CAD assembly to a 3rd party, like a vendor, for example.  But we don't want to directly export the full 3D model.

Why?  The 3D model contains all the information required to build the components within the assembly.  The "feature rich" assembly may be overkill because the extra information, such as internal cavities, may create a model that is "overly heavy and complicated" for the end user.

Even worse, giving them that feature rich model may give away proprietary information that may allow an unscrupulus end user to take advantage of our hard work.

Would you always want to send out a model with all this detail to a 3rd party>?


In older versions of Autodesk Inventor, you could derive the assembly into a part model, and use standard Inventor part modeling tools to remove the excess features.  You could even use Autodesk Inventor Fusion if you wanted.

But this process took time, and while it might be worth it to protect intellectual property, who doesn't want a faster way.

As of Autodesk Inventor 2013, there is a way.

To take advantage of this new tool, the model is still derived into a part file using the Derived Component too, just like before.

We still go into Derived Component


We can still go into the Options tab, and change how the assembly is derived and remove parts and features that we don't need.

But now check out the "Options" tab for the new options.

But a new option in this window is to remove internal voids that allow the part to be quickly simplified.  With the addition of this tool, manually filling holes, voids, and generally "dumbing down" an assembly can be reduced, or even eliminated.

Remove voids!  The new tool! 

So on that note, here's a video that shows both the steps, and the result of a quick simplification of a component.


Have a suggestion on how you approach this challenge?  Drop a comment below! 

2 comments:

  1. Hello Jon,

    I've followed all the steps to remove voids as of your engine example but the voids remains inside the motor. Working with Inventor Professional 2013.

    Can you explain me why?

    Lucian Crisan

    ReplyDelete
    Replies
    1. Lucian,

      Is the solid able to seal itself sufficiently to fill the void? Any chance that it has some sort of hole that Inventor can't close?

      Perhaps manipulating some of the settings?

      Delete