Autodesk A360 and Your Own Private Wiki

One thing I've learned from my aircraft maintenance classes, as well as from my various aviation mentors, is that the information surrounding a design can be every bit as critical as the design itself.

For example, aircraft have extensive logbooks recording all maintenance and inspections that have been performed on the aircraft.  At any time, your friends from the Federal Aviation Administration (FAA), can drop in and say.

"We're from the FAA, we're here to help.  May we see your aircraft maintenance logbook?"

A typical aircraft maintenance logbook.  This is not to be lost! 

Needless to say, if you don't have an accurate and updated logbook, you may feel a few beads of sweat on your forehead.

The point of my little anecdote is that when working with an aircraft, product, or design, the information that drove your design in a given direction can be every bit as important as the design itself.

That information may come in the form of spec sheets, vendor quotes, or meeting notes.

What would you do if you were asked, "What information drove you to make the decision you did?

In my experience, these documents are often misplaced or even worse, lost forever.  Meeting notes get thrown out, spec sheets get dropped in "a network drive somewhere", and vendor quotes are left in "an email from a few months ago".  

As I've taken a deeper dive into Fusion 360 and Autodesk A360, I've found that A360 provides a nice tool that can help with that very thing.

A360 has a "Wiki" folder that let's you create documents letting you keep the information you need with your project.

The "Wiki" folder hidden in A360.

It's a special folder where you can add information and add links to whatever information you deem important to your project.

Here you can create multiple documents, share them with other members of your team, and allow them to comment, and update the documents.

A sample of my A3t60 Wiki.  I only have one page started

In my initial test, I created a Wiki page with links to important documents that I might need.  These references are documents from the FAA, links to important technical documents, and helpful instructional videos.

The Wiki page I created for my Fusion 360 project.

Now is that all you can do?  Hardly!  Personally, I've only just waded into the shallow end of the pool.

But it's something I intend to make further use of, and if you're using Fusion 360, I think that it's worth taking a look at what this Wiki folder in A360 can do for you.

After all, if you don't record it, it's like it never happened in the first place.

So what do you think you could use this Wiki page for?

Share your thoughts!  In the spirit of collaboration, let's all learn together!

Fusion 360 and A360 - Using Them Together

There's a lot of talk about Fusion 360 and all the things it can do, and there should be! It's a great tool that does a lot of great things, and it's doing more all the time.

But just as important, is sharing the right information, and sharing it with the right people. 

If you've used Fusion 360 before, you've almost certainly used the data panel.  It's where your projects and project data is stored and organized

The data panel, ever present, on the left of your screen

But did you also know that it's folders are mirrored to Autodesk cloud storage service A360? 

The folders mirrored in A360

If you're a big Fusion 360 user, you may be shrugging and saying, "so what?"

But what if you need to share that data?  What if you need to access that data from multiple computers or mobile devices?  

A360 can come in handy for that, sharing with consumers who may not be Fusion 360 users.

Maybe they just need images for marketing, or maybe it's something that you or your team want to review on site?

Maybe you just want to embed some code to create a view-able file for a blog post... (spoiler alert!)

That's a job for A360!  

So before you throw it in the "Wastebasket of Meh", give it a thought or two, and think about how you can use it. 

I know it's possibilities are inspiring me, and I'm looking forward to exploring further! 

Since I can access my data on my tablet, exploring should be easy! 

Can you hear the music to "Travelin' Man"? 

I'm looking forward to sharing what I learn! 

I'm already getting some great ideas! 

The First Post of 2017 - Fusion 360... And Now What?

Here I am, sitting on my couch on New Years weekend.  I have one more day off of work, and another week before aircraft maintenance classes start again.

I've had a little bit of time with Fusion 360.  I've been playing around, just making a few parts and renderings.  And most of all, continuing to explore it's possibilities.

An elevator bearing bracket.  Modeled and rendered in Fusion 360. 

There's still much more for me to look into, and as Fusion 360 is updated, more features appear all the time (and that's a good thing!).

But now that 2017 is here, what is the biggest thing to I'm looking forward to?

Flat out accessing data anywhere I want.  I don't have to worry about where I saved data, was it put in a PDM system like Autodesk Vault, and can I access it where I currently am.

As long as it's saved in Fusion 360, and I have a connection to the internet, I can see the data.

I've already been able to access data on my tablet on a site. Far more portable than having to open up a laptop and boot up!

Tablet and Laptop.  Syncing data with no extra effort on my part! 

And I'm looking forward to taking a bigger advantage of that!  I'm also looking forward to sharing more!

So here we go, 2017.  Time to pave a new trail and see what the future brings us!

Aircraft Maintenance Class - Done for Now!

InventorTales has been a little quiet for the last few weeks, and that's because I've been head down in Aircraft Maintenance classes again.

It's fascinating, and, at times, frustrating.  It meant an additional 25 hours per week in class on top of the 40 hours a week I put into my day job.

A photo posted by Jonathan Landeros (@jlanderos1973) on Dec 16, 2016 at 6:06pm PST

The lab at Mount San Antonio College where I learn how airplanes tick.

It's fascinating, and, at times, frustrating.

It was 12 long weeks of studying sheet metal, metal alloys, wood and fabric construction, and composites.  

Those classes gave me lessons that will go far beyond the classroom.

A photo posted by Jonathan Landeros (@jlanderos1973) on Dec 8, 2016 at 7:20pm PST

There is more to laying out rivets than meets the eye...

But I don't want to turn this into bragging about what I did in class.  What now for InventorTales?

I'll have the next few weeks off of class, and in that time, I'm planning on getting reacquainted with Fusion 360, and sharing a bit of what I learn.

So stay posted, and enjoy this holiday season!

Three Things Safety Wire Taught Me About "How Hard Can it Be?"

My aircraft maintenance classes at Mt. San Antonio College, and yes, that does reduce my blogging time still!  

But it keeps me learning, and in this short post, I'm sharing a bit of my experience with a cocky phrase I think all of us have encountered at one point. 

How hard can that really be? 

For me, safety wire was one of those cases.  Deceivingly simple, there's a lot more that goes into it that what first meets the eye. 

An example of safety wire on a fuel totalizer.
It looks like twists of wire, but there's much more to that. 

So what is safety wire?

Also referred to as "lock wire", safety wire is what is called a positive locking device.  It serves the purpose of preventing a fastener from loosening or falling out, and also serves as a witness that the fastener has been properly torqued. 

That covers the "whys", but what about the "hows"?   It's the "hows" where the hidden challenges in the process begin to reveal themselves. 

From the Federal Aviation Administration's book AC43.13, here are the requirements for proper safety wire installation on an aircraft. 

• Safety wire must be installed in such a way that the fastener cannot loosen. 
• Safety wire must have 6-8 twists per inch.
• Never overstress safety wire. It will break under vibration. 
• Wire must not be nicked or kinked, that includes backing off twisted wire if you've twisted it too many times.

On top of that, there are diagrams upon diagrams of examples displaying the proper procedure for various types of applications.  

An example of some safe wire combinations
From AC43.13

For me, that meant making a lot of mistakes.  I've gotten the wire too loose, I've kinked the wire, I've even gotten the direction backward, loosing the fastener instead of tightening it. 

And all of that means grumbling in frustration, cutting it off, and doing it again. 

So what does that mean for those of you out there?  Many of you will never touch safety wire, and that's alright.  It may not be your thing.  

But one lesson from a few twists of wire can be summed in a few simple phrases.  

Just because it looks easy, doesn't mean it is.  And if someone makes it look simple, it may be that they've been honing that skill for years. 

And that can be true of an task, be it safety wire, welding, running a CAD program, or installing a data management system.  

So see the world with an eye for learning from those experts! 

Acknowledgements:

Acceptable Methods, Techniques, and Practices - Aircraft Inspection and Repair.  FAA Advisory Cicular AC43.13-1B

 

How the Cloud Saved my Butt - And my Homework Grade

I'm still taking my aircraft maintenance classes at Mt. San Antonio College.  And while it's rewarding, it's enormously time consuming.

Between work and class, it means days starting at 5:30 AM and ending at 11PM.  It makes me grateful for a supportive family, but something does have to give, and in this case, it's the blog that suffers.   

One of the instructional airframes, the Cessna 337 Skymaster.

But life is still teaching me lessons, and this is one where data in the cloud helped save my grade.

I store my homework in Google Drive.  Why?  I can access it anywhere, and it's always backed up.  It's always nice to be able to open the latest version on my phone, laptop, or work computer, without having to worry about uploading or emailing documents. 

And as a final bonus, I have semesters of homework available for my reference.

A photo posted by Jonathan Landeros (@jlanderos1973) on Nov 5, 2016 at 5:17pm PDT

The infamous textbook.  My dinner companion many nights.

Perfect cloud application, right?  Of course!

But last week, I had an interesting experience that thankfully, the Cloud saved me from. 

In a rush at work, I hurriedly printed and stapled my homework to turn into class.  Once turned in, I went merrily on  my way, satisfied with a job I thought well done. 

But the next day, I got a surprise that made my stomach sink. 

The instructor returns my homework with a 43% on it.  I'm shocked!  How?

He tells me, "You're missing half your homework."  

Gobsmacked, I flip through the pages.  Sure enough, two of the four pages are blank.  

I kick myself for not checking.  It's a stupid mistake. 

The teacher breaks me out of my trance.  "I don't know how to rectify this with you.  The quality of work implies you did the homework, but if you can't get it to me tonight.... "  

My brain races, and suddenly a solution.  "Can I email it to you?"  

"I'll take that."  The instructor tells me, giving me a ray of hope.

I fumble with my mobile phone for a few minutes, and manage to send a *.docx file to the instructor.  Mercifully, my grade goes from a 43% to an 83%. (I made some bonehead mistakes technology can't solve). 

So that's my story, but what are the lessons?  

1) Technology is awesome!  But don't rely on it too much. - I didn't spend 10 seconds flipping through the pages of my homework to make sure it was all there.  I assumed it was, and that nearly cost me. 

2) When used properly, technology is  invaluable. - As contradictory as it seams, technology also saved me from... technology.  If I hadn't been using a cloud account, and instead had my homework stored on a document on a machine, I may have been stuck eating a failing grade.  By having the ability to send the instructor a word document, I salvaged a bad situation. 

3) Make Technology Work for You! - I think this is the biggest lesson of all.  We all have different needs, and technology has many ways of helping us out, not just one.  Just because I use it one way doesn't mean you have to use it in exactly that way.  Take my ideas, combine them with so many others, and come up with something that makes you're life easier! 

So take my lessons, make them your own.  From now on, I'll be double checking that homework with my good ol' "Mark 1 Eyeball.". 

I'm Back in Class - Why You Haven't Heard from Me

I know it's been quiet the last couple of weeks.

But it's that time again, I'm back in Aircraft Maintenance Class trying to gain some new skills.

A "Special Fasteners" plate. I learned that safety wire
is both an exercise in patience, and p

The back of the plate shows just *some* of the fasteners
found it a typical aircraft. 

That means working a full week, plus running to class to put in an extra 25 hours per week.

Needless to say, I don't have much time to sit down and blog!

But I'm learning new skills and finding new ways to apply the skills I have.  It's a great experience!

Learning to hold a part with Clecos (the copper pegs), before setting solid rivets.

And I'm already dreaming of a few new posts! 

You haven't gotten rid of me that easily.

A Little Glitch in the (A360) Matrix

Sometimes, the internet hiccups. And I found that happened with my Autodesk A360 account earlier this week.

This is *not* a glitch in the matrix.
I have three black cats.

Friday, I was going to log into my A360 account, and all I saw was the login screen.

Seeing how this is a normal thing to see, I logged in, and waited for A360 to do some technical things.

This before login is normal.

I wait excitedly to be greeted by the wealth of my accumulated information, and what do I see instead?

Seeing this after login is NOT normal!

That's right!  I loop back to the login screen!  It's about 10:30PM.  So I give up and go to bed.  Maybe the next day will fix it.

I try it again on the following day, and I still get the same thing.  It's time to ask Google!

And Google yielded some results from the Autodesk Community itself.  

You can read the thread at the link here, and I encourage you to do so!  

But here is the summary from that page.

The solution!

I tried it, and that solved it!

I was running Google Chrome, to clear your browser history in that program, hit CNTL+H, and choose the Clear Browsing Data button.




Then shut down your browser, and restart it.  Try logging in again, and the problem should be solved.

So if you're running into this issue, give this solution a try!

A Fusion 360 - Quick Tip on Showing Modeled Threads

It's sizing up to be a hectic week, but here's a really quick tip I discovered while creating some aircraft fluid fittings in Fusion 360.

A typical 37 degree flared fitting.

Did you know that while creating, or editing threads, you can change whether the thread representation is shown as a graphical representation, or as a modeled thread?

And you can toggle it off at will!

Showing the modeled thread location.  Right click (1), and check (2)!

Check it out, and give it a try!  When rendering models, this can make the difference between an average rendering, or a great one!

When you rendering without the threads displayed....

Not a bad rendering, but something is wrong.....

But now if you check that one simple box....

Now that's a big difference! 

Keep it in mind for a time that you need it!