Find us on Google+ Inventor Tales

Friday, October 31, 2008

Finding Your (Home) View

In Inventor R2009, we saw the view cube appear and 'Home View' replace 'Isometric View' inside the right click menu.



But what happens when we need to define a new Isometric view? With our common view gone, now what?

There is still away. Choose a new view using your View Cube, right click on the View Cube, and choose 'Set Current View as Home'.

You can select from two types of home views (From the Inventor Help on the topic).

  • Fixed Distance: Sets a Home view that defines both the direction of the view and the extent of the model that fills the view.
  • Fit to View: Sets a Home view that defines the direction of the view and the extent is always ‘view all’. The initial Home view of Legacy documents is set to Fit to View.






Now when you right click and choose the Home View. The that view will be redifined to what you want it to be.

A big difference between R2009 and its predecessors is the home view can be any view, not just isometrics like in earlier versions.

In KETIV news:

For those who are going to be at Autodesk University in Las Vegas starting December 2nd, look up the classes being held by two of my colleagues, Nicole Morris and Mike Carlson! I'm sure there's a lot of great information they can offer!

Mike's Class

Stop Stringing it! Digitally Prototype those Wires and Harnesses


Learn to use Inventor Routed Systems to Digitally Prototype your wires and cables. Stop using the "old school" method and add more value to your mechanical design. Time and money have been wasted on electrical design and now you can virtually eliminate that waste. No more issues with tight radius bends and rework of mechanical components to allow proper clearance of for cables. Learn how to communicate with AutoCAD Electrical using XML imports and exports. Finally, document those designs effectively for manufacturing with nailboards, run lists, and cut tables.



Nicole's Class

Unleash the Spreadsheet

Learn how to increase the power of AutoCAD Electical using spreadsheets. Automate, populate, and stimulate your drawings with software you already know how to use. Learn the ins and outs of creating data outsite and brining it into AutoCAD Electrical. See how many designers use spreadsheets to plan a project and reuse data effectively. Understand the fundamentals of these tools allowing you to cut production time in half.

Become comfortable with how spreadhseest are handled in AutoCAD Electical so that youc an create your own versions. Samples and Datasets included.

One last note. Happy Halloween!


Monday, October 13, 2008

Playing Your (Drawing) Scales

Just a short tip on one of those 'little' things that comes up from time to time.

I came across an issue where someone was placing an AutoCAD drawing in Inventor (via the cut and paste method), and the view pasted into the file was the wrong size.

Closer inspection showed that the view was scaled to a factor of 24.5. In other words, the part was created in mm, and had been pasted into an inch drawing (or vice versa).

In any case, here's a quick way to fix those when they come up.

Once you've copied your geometry from AutoCAD, Paste it into Inventor as you normally would.


You'll see the preview box, however, before you left click to place the view, right click again.


Right click and choose 'Paste Options'


Once you choose Paste Options, you'll see the options screen that will let you specify what units the sketch should be in. Pick the units, and this should fix the issue!



Thanks again for coming to Autodesk Manufacturing Academy (AMA). Feel free to swing by our website here, and take a look at some pictures.

Wednesday, October 01, 2008

I Prefer Perfect Perforations (in Sheet Metal)

First of all, thanks to everyone who came to the Autodesk Manufacturing Academy. It was great to see some old friends, as well as meet some new ones!


Here's an interesting little problem a user ask us during the sheet metal class (I'm sorry but I dont' remember the name!).

How can perforations be created on a sheet metal part in such a way that the geometry can be cut on a CNC machine of some type (laser, water jet, etc).

One of the simplest solutions would be to create a transparent texture that would visually show the perforations, but that doesn't give you any geometry that could be cut by the machine.

Another method would be to try to model the perforations and use a pattern to wrap them aroudn the folded model, but that could be tricky, and if the pattern gets to be large, could cause a performance issue.

Another option a bit of a marriage between the two options. You can create a folded model without perforations, but add them to the flat pattern using the modeling tools there.

The perforations won't show in the model, but you'll have them in the flat where the CNC machine will cut them.

Here's the folded model.


Here's the flat pattern, with some sample perforations added in the flat.





In this method, you achieve a balance between the need for and accurate part representation for the machine, while eliminating the extra effort of trying to maintain the pattern on the folded model!

And if you still want it, you can still use a texture for something representative on the folded model!

Friday, September 19, 2008

Meet at the (Theoretical) Intersection

Every once in a while you may need to create a dimension on a drawing where a part's sharp corner would be, if there weren't a fillet, round, or chamfer in the way.

Here's a quick description of the steps used to get there from here.

First, we have the part with chamfers breaking up the theoretical sharp corners on our drawing.



Step 1: Start your General Dimension tool as you normally would, and choose the first line you want to dimension (the first half of the intersection).


Step 2: Right click, and choose 'Intersection' from the menu that appears.


Step 3: Hover over the second line in your intersection. You'll see a preview appear showing you where the dimension will anchor. Onse you see this preview, you can left click to place the first extension line of your dimension.


Step 4: Click the second edge you want to dimension (in this example, another 'theoretical intersection') . The dimension may place 'unusually', since it will initially think this is where we want our second extension line placed.

We're going to fix this by telling the second extension line to anchor from the theoretical intersection.



Step 5: Right click again, and choose 'Intersection' from the menu.




Step 6: Just like earlier, choose the second edge that will comprise your intersection. A second preview will appear.


Step 7: Select the edge, and your dimension will be placed.


Happy Friday!

For those who are going to be at AMA on September 25th, I'll see you there!


Thursday, September 11, 2008

Autodesk Manufacturing Academy


As part of my new home at Ketiv, I'll be at the Autodesk Manufacturing Academy in Cerritos on September 25th!

The events going to be a full day of Manufacturing based courses including Inventor, Data Management, and AutoCAD Electrical.

Feel free to check it out by clicking here! I hope to see you there!

Monday, September 08, 2008

Inventor CAM - The next Adventure!

Part of my new tech journey is venturing into the world of CAM (Computer Aided Manufacturing).

Hence, here I sit with InventorCAM on my system. Working with programming CNC machines using InventorCAM.

I'm still pretty early in the process, so think of this as the 'preview for the movie', but so far I'm pretty excited.

Look for a few more blogs in this regard as I travel further into a whole new world!

Thursday, September 04, 2008

Hello KETIV! - Time for a Change

Sometimes it just becomes time to move on.

After a long and difficult decision making process, I've moved on, and joined KETIV Technologies in Fullerton.

I'm looking forward to the new opportunity where I'll begin to learn CAM (Computer Aided Manufacturing) technology as well as continuing to develop my skills in Inventor, Vault, and Productstream.

Since you've located me here, you can also see that I've changed my blog address to the current one (http://www.inventor-tales.blogspot.com/).

I plan to keep blogging from this address once I get settled in to the new place, so feel free to bookmark it and take a visit back.

P.S.
Here's the website for my new home! http://www.ketivtech.com/

Tuesday, August 05, 2008

Properties in a BOM

Finally! I have a chance to put something a little more substantial in the blog. It's been hectic, so I'm afraid I haven't been able to put more than a 'blurb' (that's a technical term) in here.

I was asked a little while ago how to get properties into a Bill of Materials, but in the format of 'length X width X Thickness' look.

Now, a chance to document it!

So here we go.

First, a picture of the part I'll be using for this portion of the blog. I've circled the dimensions I'm going to work with.



The first thing you need to do, is rename the variables in your parameters screen, and name them something that is a little more sensible than the Inventor issued variable names. (Okay this isn't REALLY necessary, but it'll make life easier).


Once this is finished, go to File>I-Properties and create a custom variable with the following format. = X X The format is important. This combines all the variables on one line. Like before, you need to remember the name of this variable (you'll need it later).



Click 'Add' followed by the 'Apply' button and the value will enter and update. Note the 'fx' symbol next to the property, indicating that the value is driven by parameters.



Now, we configure the drawing!

First we've got a drawing with the part, and the Bill of Materials placed, but we still need to add our new property.

First we edit the BOM (right click on the BOM and hit 'Edit Parts List' and go to our 'Column Chooser'


Once in the Column Chooser, create a New Property, and enter the name you entered in the I-Properties.


Hit OK (a few times) to close all your dialog boxes. The property will show up in the BOM, and now you can adjust the formatting until you have the look you want.


The other advantage of this particular method, is if your part changes, the parts list will also update as well.

Happy Inventing everyone!











Friday, July 18, 2008

Following the I-Map

From the depths of Autodesk Labs comes up yet another tool.

I-Map for Inventor.

This, in my humble opinion, may be one of the best technology previews yet. There's a lot of potential in this one!

The Link for I-map is here.

I-Map let's you create a map of constraints and shows which parts the constraints are acting on.

The picture attached below shows an example of how constraint mapping works. It's like a flow chart for constraints (at least that's how my little brain views it). Click on the picture to enlarge.



The other option is Skeletal I-maps, which also let you see features and exported parameters.





When you install I-Map, you can access the tools by right clicking in the modeling window (Note it's got to be the modeling window for the assembly you intend to map!)


The constraint maps open up in a second window, so you can toggle between the two by using your Windows Pulldown in Inventor.

I-Map also gives you a new shortcut on your desktop to start it. So you always have the option of starting Inventor without it if you choose.

Happy Inventing everyone!

Monday, June 16, 2008

Autodesk Labs Preview - Vista-ize your Inventor

There are those of us who like to live life on the edge. I for example, was running Windows Vista and Office 2007 before SP1 was even out.

Don't even think I can be stopped, I'm a man on the edge!

Now, the Inventor UI preview is available for download from Autodesk Labs, located here.

The screen capture below is an example of some of the changes.


By installing it, you have the option to get the new 'Ribbon' features similar to what you would get in the Office 2007 products.

My personal view, after some 'seat time' with Office 2007, I've grown to like the interface myself. After a few minutes working with Inventor's new UI preview, I think I'll like it too once I'm accustomed to it.

And don't worry, there is a safety net. When you install the preview there are two icons to start Inventor, one with the old UI, the other with the new UI.



If you choose to try it, have fun!

Friday, May 30, 2008

Selecting Text issue with Word 2007 and Vista

They say that being the pioneer means you have to catch all the arrows.

This was the Vista adventure a couple of days ago.

Vista installed some updates for me (that's right, it didn't ask me first), and after that Word's functionality got 'interesting'.

I tried to edit my Word document, and I couldn't select any of my text with the mouse! I use the arrow keys and edit my document the (very) hard way, but the mouse cursor would just float over the top of the words like they weren't there.

After grumbling and complaining to my laptop, I decided to do a Google search, and found the following solution.

http://support.microsoft.com/default.aspx?scid=kb;en-us;940791

It does involve a registry edit (albeit an easy one), but as always, be cautious and backup your registry.

After doing this, the problem went away!

Happy Friday!

Thursday, May 29, 2008

Adding more fields to Vault (because there's never enough!)

I recently was asked how do I add fields to my Vault file list.

It's actually much easier than you realize, once you know where to look.

Here's the fields that I currently have shown in my file preview.


My next step is to go ahead and add a new one. First, all I have to do is right click on the title bar.

This brings up the 'Customize Field' dialog box, where I can choose the fields I want to add or remove. Note that you may have make sure the pulldown in the upper left is set to 'All File Fields', if it's set to 'Frequently Used Fields', it may be blank (since no fields may have been used frequently in your case)!

Once this is done, hit okay, and the new field will appear (or the ones removed will disappear). In the example below, I used the 'Add' button to insert a 'Last Write' field (circled).

Hope this is helpful!

Thursday, May 22, 2008

Keeping Yourself, or at Least Your Gravity, Centered

One of the nice 'subtle but significant' new features in Inventor R2009 is the ability to add a center of gravity marker to your drawing.

In this example, I'm going to show the COG (center of gravity) symbol on the fixture shown here:



I'm starting out with a view of a simple jig, but we want to show the COG for this asssembly. Here's a picture, although we'll actually show the COG in the top view.

Here's the steps.

1) In the browser, locate the part or assembly where you want to show your COG.



2) Right click on the assembly of interest, and choose the 'Center of Gravity' option.


3) That's it! the COG will be shown on your view! You can also place dimensions on it so you know exactly where it is!

Tuesday, May 06, 2008

Changing Your View (Cube)

It's been a while since I've posted, and again, it's been hectic.

But here's at least one of those 'little things' that I've noticed poking around in Inventor.

When you're using the view cube (which I've been practicing with), you can use it to orbit too.

If you click anywhere on the cube and drag, you can orbit your part without having to go to the icon, or your F4 key.



Happy Inventing!

Monday, March 31, 2008

R2009 A different View

Time for the first 'what's new' in R2009.

The first thing is the view cube, which is located in the upper right of the screen (although it can be turned off). If you click on the picture below, you can see it indicated in the red circle.



Pretty much the same tool as in the DWF Viewer, it supercedes the 'glass box'. By clicking on different portions of the box, you can rotate your view to look at the model from different angles.

At first, this fell into the 'Well, that's cool, but I'll never use it' category. Especially since I'm using a Space Traveller from 3D Connexion (www.3Dconnexion.com).

Well, that perspective changed pretty quickly. After spending a couple of hours using it, I found that I was using it quite a bit more, particularly for looking straight down at narrow edges (especially sheet metal).

So much for that first impression. I think I'll be using this quite a bit more than I initially expected!

One last note! The 'Isometric View' is now called 'Home View'. Not a big change, but it might through you off a bit the first couple of times.

We'll see what a little more seat time shows!

Tuesday, March 25, 2008

It's that time again!

Yes, it's that time of year again!

The 2009 releases are here! I'll be trying to point out as much of the new stuff as I can in the next couple of weeks, but it's going to be a rush to take it all in!

Feel free to take a look at the Autodesk website here!

Specifically, the Inventor what's new is here.
AutoCAD Electrical is here
.

Tuesday, March 18, 2008

I get by with a little help from my friends.

Yes, as I quoted the Beatles on this one. I guess that means I'm getting old. :-)

As I'm working some new tips (it has been a little crazy lately), I wanted to mention that I've added a link to a new Inventor/AutoCAD Electrical/Data Management blog on my links section.

Among the other Blogs, please check out Steve McCarthy's Cadgneto blog here!

Feel free to bookmark it, or just pick it from the 'blogs' section of the page!

And feel free to cruise by some of the other blogs on that section!

Friday, March 07, 2008

It's not copying, it's 'reverse engineering'.

Today, I'm putting out a Vault tip that everyone may find useful. Copy Design.

Copy design is a way of taking an assembly, and all the parts and drawings that go with it, then reusing the parts that are reused, and making copies of parts that are new.

For this example, we have a part for a wood coffee table that needs to have a section cut from it (referred to as a 'Cloud Lift')


However, from previous designs, we know that there's a jig that already does this for a different part.


The basic jig is the same, we're using the same clamps, handles, and stops. But the base of the jig (where the router bit will actually ride), will need to be shortened for the new jig, since the part it's cutting is shorter than the current one.

Here lays the rub. We're still making this stretcher, so the current jig must remain available.

Here's where copy design can help.

First open Vault Explorer. Then locate your jig (cleverly named 'Cloudlift Fixture'). Right click on it, and choose 'Copy Design'

Once Copy Design comes up, you can choose which parts you want to reuse (designated by the yell0w '+' symbol), or which you want to copy (designated by the Cyan '++' symbol).


In this case, I'm copying the assembly file, the base, and any drawings that go with it. Once I've done this, I click OK.

Once this is finished, I can go edit the new assembly in Inventor, and make the changes I need.

In this case, I shortened the base to fit the new part, moved the clamps and handles to the correct position, then updated the drawings.

The good news, I didn't have recreate any of the assembly, or create any new drawing files (although I did have to create a couple of new views for the design).




The second jig took about half the time to create than the first (maybe even less, but I wasn't very scientific in my tracking).

Still, it can be a huge help in reusing data, preventing duplicate files, and reducing the chance for errors (and lost time), down the road.

Happy Friday!